do not scale from this print .250 6.35 ref 2 max sway (either direction) "a" "a" ipt1-xx-d .200 5.08 ref ((no of pos x .1000 [2.540]) + .0200[.508]) .010[.25] .025 sq ref 0.64 see note 8 .100 ref 2.54 .060 1.52 (no of pos -1) x .1000 [2.540] 2 max sway (either direction) 01 02 c l ipt1-1xx-xx-xx-d-vs-xx-xxx no of pos per row -02 thru -25 row specification -d: double (use ipt1-xx-d) plating specification -s: heavy selective gold (use t-1s6-25-s-2) -sm: heavy selective gold, matte tin on tail (use t-1s6-25-s-2) -l: light selective gold, matte tin on tail (use t-1s6-25-l-2) lead style -01 option -pol: position #1 removed (use ipt1-xx-d-p) -k: polyamide film pad [available on positions -03 thru -25 only] -fl: friction lock [pos -05 thru -25] (use ipt1-xx-d-fl-x & t-1s64-05-x) -tr: tape and reel -vs: vertical surface mount tail option -a: alignment pin (use sm-a11) [4 pos min] -lc: locking clip (use lc-07-tm) [4 pos min] option p .155 ref 3.94 (see note 6) .050 .010 1.27 0.25 .290 7.37 90 - 0 + 5 section "a"-"a" t-1s6-25-x-2 c2 c1 see table 1 .118 .003 3.00 0.08 .368 9.35 ref in-process packaging view tube: pt-1-24-01-103 plug: tp-09 [-02 position to be bulk packaged] c p sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01[.3] 2 .xxx: .005[.13] .xxxx: .0020[.051] material: .100 double row shrouded terminal assembly by: ipt1-1xx-xx-xx-d-vs-xx-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 11-06-2002 2 1 sheet scale: 2.25:1 insulator: vectra e130i, color: black contact: phos bronze, 510, 3/4 hard f:\dwg\misc\mktg\ipt1-1xx-xx-xx-d-vs-xx-xxx-mkt.slddrw notes: 1. represents a critical dimension. 2. maximum allowable cut flash: .010[.25]. 3. minimum terminalt push out force: 2 lbs. 4. maximum variation between pin rows: .005[.13]. 5. "end walls" after cutting should be .015+/-.003[.38+/-.08]. 6. pins to be flush to .008 [.20] maximum recessed in body. 7. all dimensions to be about centerline within +/-.005[.13]. 8. presence of voids is optional and pattern to which they occur is variable. 9. after revision t of componet print ipt1-xx-d-xx-x, samtec logo to appear on core #1 for positions 1 through 5 and core #1 and #49 for positions 6 through 50. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision p
19 20 01 02 ipt1-xx-d-p ipt1-xx-d-fl-x t-1s64-05-x .105 2.67 .010 ref 0.25 (no of pos -2) x .1000[2.540] .056 ref 1.42 lc-07-tm (no of pos -2) x .1000[2.540] .105 2.67 .063 ref 1.59 sm-a11 "r" ref (see note) .2362 .0050 5.999 0.127 .018 .010 0.46 0.25 "s" (see note) c3 [available on positions -03 thru -25 only] note: "r" = use measured dimension "s" = (("r" - .2362[6.000] / 2) .020[.51] .305 7.75 -k: polyamide film pad option ipt1-110-01-x-d-vs-lc-fl shown -lc: locking clip option -pol: polarized option ipt1-110-01-x-d-vs-pol shown ipt1-110-01-x-d-vs-fl shown -fl: friction lock option -a: alignment pin option ipt1-110-01-x-d-vs-a shown sheet of .100 double row shrouded terminal assembly by: ipt1-1xx-xx-xx-d-vs-xx-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 11-06-2002 2 2 sheet scale: 2.25:1 revision p f:\dwg\misc\mktg\ipt1-1xx-xx-xx-d-vs-xx-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
